Install Instructions

STE-1401/1402/1404/1405 2 Installation Guide© 2014 KMC Controls, Inc. 717-019-14E
KMC Controls, Inc.
19476 Industrial Drive
New Paris, IN 46553
574.831.5250
www.kmccontrols.com
[e-mail]
Specifications
Sensor Type III, 10K ohm @ 77° F (25° C)
Temperature Limits –4 to 221° F (–20 to 105° C)
Wiring 22 AWG wire leads
Enclosure None for STE-1401/1405,
plastic standard or metal
optional for STE-1402/1404
Probe Lengths
STE-1405 4 inches (100 mm)
STE-1401/1402 8 inches (200 mm)
STE-1404 12 inches (300 mm)
Maintenance
No routine maintenance is required. Careful
installation will ensure long term reliability and
performance.
Configuration
For controller conguration, see the Type III Sensors
Applications Guide on the KMC web site.
More Information
For additional information,
see the STE-1400 Series
Data Sheet on the KMC
web site.
For troubleshooting, con-
troller conguration, and
other information, see the
Type III Sensors Applica-
tions Guide on the KMC
web site.
Important Notices
The KMC logo and KMC Controls are registered
trademarks of KMC Controls, Inc.
All rights reserved. No part of this publication may
be reproduced, transmied, transcribed, stored in a
retrieval system, or translated into any language in
any form by any means without the wrien permis-
sion of KMC Controls, Inc.
The material in this document is for information
purposes only. The contents and the product it
describes are subject to change without notice.
KMC Controls, Inc. makes no representations or
warranties with respect to this document. In no event
shall KMC Controls, Inc. be liable for any damages,
direct or incidental, arising out of or related to the
use of this document.