Product Overview

© 2015 KMC Controls, Inc.; KMC Controls
®
and ControlSet
®
are registered trademarks of KMC Controls 036-035-01M
KMC Controls, Inc.
19476 Industrial Drive; New Paris, IN 46553
574.831.5250
www.kmccontrols.com;
[e-mail]
(Quick-Mounting) “V” Models Valve Cross-Reference
MEP-4xxxV actuators have brackets with a pat-
ented* quick-mounting mechanism that mounts
directly on VFB-43...BC and VFB-46...BC series valve
bodies. See the HPO-5074 installation guide and
the VEB-43 and VEB-46 series data sheets for ad-
ditional information.
NOTE: “V” actuators were installed in VEB-43...
CF, VEB-43...CK, VEB-46...CF, and VEB-
46...CK valves starting in mid-June 2011
(date codes 11166 and later). Replacement
(non-fail-safe) actuators for valves before
this date code would be MEP-4002/4003.
With the HPO-5074 kit, MEP-4xxxV actuators can
be mounted on the following KMC and other valve
bodies:
“V” Actuator Installed on VEB-43 Series Valve
Body with HPO-5074 Quick-Mount Adapter Kit
Typical Application 3-Way H/C Water 2-Way H/C Water 2-Way PIC-V H/C Water
KMC Valve Body VFB-46__BC* VFB-43__BC*
N/A
KMC Valve VEB-46___B__ VEB-43___B__
Valve Solutions (VSI) UR3 Series UR2 Series SPV Series
Griswold UR3 Series UR2 Series SPV Series
Delta Control Products ST Series ST Series ATI Series
Honeywell VBN3 Series VBN2 Series
N/A
Siemens 599 Series 599 Series
*VFB-4___BC valve bodies come with the HPO-5074 already installed.
Valve Model and Date Code Label
(below actuator on models without
“V” actuators or on the side of the
valve on models with “V” Actuators)
VEB-43XXXXCK
XXXXX
VEB-43XXXXCK
XXXXX
For torque selection, accessories, troubleshooting,
and other information, see the MEP-4xxx Applica-
tions Guide.
For more information on mounting, wiring, aux-
iliary switches, feedback/direction selectors, and
actuator/signal range reset (auto-mapping), see the
MEP-4000/4800 Series Installation Guide.
For sample proportional single-zone heating/cool-
ing and pressure-dependent VAV applications using
the CTE-5202 thermostat, see the CTE-5202 Applica-
tions Guide.
For similar actuators with fail-safe, see the MEP-
4200/4500/4900 Series Data Sheet.
Accessories and More Information
NOTE: When replacing a KMC MEP-5xxx actuator
with an MEP-4xxx actuator on a ball valve,
two options are:
• Using an MEP-4xxxV with an HPO-5074
kit.
• Using an MEP-4xxx (non-V models)
with an HMO-4004 kit.
*NOTE: The quick-mounting mechanism is
protected under United States Patent
Number 8,789,807 B2.