Product Overview

ManualsBrandsKMC Controls ManualsDampersDirect-Coupled ControlSet Actuator, 2-10 VDC (40 in-lb)

Table Of Contents

Models

Model

Number

MEP-

Torque Control Built-in Options

40 in-lb. min.

(4.5 N•m)

80 in-lb. min.

(9 N•m)

Tri-state (Floating) or

(3-wire) 2-Position

2 to 10 VDC

Proportional

Feedback: 10k ohm

Potentiometer

Feedback: 1–5 or

2–10 VDC

Auxiliary Switch

(Adjustable, SPDT)

4001(V)*

4002(V)*

4 4

4003(V)**

4013

4021

4022

4 4

4801

4802

4 4

4813

4821

4822

4 4

*MEP-4001V/4002V/4003V have the quick-mount option.

**The MEP-4003/4003V do not have two-position functionality

or the larger green top enclosure.

Speciﬁcations

Supply Voltage 24 VAC (+20%/–15%), Class 2

only

Supply Power Tri-state/two-position, 2 VA;

proportional, 4 VA

Control Signal Tri-state/two-position, 24 VAC;

proportional, 2 to 10 VDC

Frequency 50/60 Hz

Feedback Output

Tri-state/2-Position 10K ohm ±10% (on select models)

Proportional 1 to 5 VDC or 2 to 10 VDC

(switch selectable)

Auxiliary Switch Adjustable 0 to 95°, SPDT 6 A

resistive load (3 A motor load) @

24 VAC (on select models)

Angular Rotation 0 to 95°, fully adjustable with

mechanical stop

Motor Timing 90 seconds for 90° @ 60 Hz;

108 seconds for 90° @ 50 Hz

Torque (MEP-40xx) 40 in-lb. (4.5 N•m);

(MEP-48xx) 80 in-lb. (9 N•m)

Mounting Direct to 1/4 to 5/8 inches (6–16

mm) round or 1/4 to 7/16 inches

(6–11 mm) square shaft by adjust-

able “V” bolt and non-rotational

bracket HMO-4002 (supplied);

minimum recommended damper

shaft length is 1-5/8 inches; HPO-

5074 required for mounting “V”

actuators to valves

Connections Wire clamp type; 14 to 22 AWG,

copper

Dimensions

MEP-4003 5.3 x 2.6 x 1.8" (135 x 66 x 46 mm)

MEP-4003V 5.3 (w/o handle extended) x 2.6 x

2.59 inches (135 x 66 x 66 mm)

MEP-4001V/4002V 5.3 (w/o handle extended) x 2.6 x

3.28 inches (135 x 66 x 83.2 mm)

All others 5.3 x 2.6 x 2.5 inches

(135 x 66 x 63.5 mm)

Weight 1.1 lb. (0.50 kg) or less

Enclosure Flame-retardant plastic

Noise Level < 35 dBA max. at 1 meter

Approvals UL 873 Temperature Indicating

and Regulating Equipment; FCC

Class B, Part 15, Subpart B; Com-

plies with Canadian ICES-003; CE

compliant; SASO PCP Registration

KSA R-103260

Environmental Limits

Operating –22 to 131° F (–30 to 55° C)

Shipping –40 to 176° F (–40 to 80° C)

Humidity 5 to 95% RH (non-condensing)

NOTE: Before Jan. 2014, MEP-40x2/48x2 models

had 0–10 VDC inputs and 0–5 or 0–10

VDC feedback instead. When replacing an

older 0–10 VDC actuator with a 2–10 VDC

actuator, make note of the dierences.

For torque selection, accessories, troubleshooting,

and other information, see the MEP-4xxx Applica-

tions Guide.

For more information on mounting, wiring, aux-

iliary switches, feedback/direction selectors, and

actuator/signal range reset (auto-mapping), see the

MEP-4000/4800 Series Installation Guide.

For sample proportional single-zone heating/cool-

ing and pressure-dependent VAV applications

using the CTE-5202 thermostat, see the CTE-5202

Applications Guide.

For similar actuators with fail-safe, see the MEP-

4200/4500/4900 Series Data Sheet.

Accessories and More Information