Product Overview

ManualsBrandsKMC Controls ManualsDampersPneumatic Rotary Actuator, 3-8 PSI with 1/2" Shaft

Table Of Contents

Accessories and Replacement Parts

HLO-1004 Drive bushing/collar, 1/2" shaft

HLO-1006 Drive bushing, 1/2" round or 3/8"

square shaft

HLO-1011 Adaptor for 3/8" shaft

HLO-1016 Collar for 1/2" round or 3/8"

square shaft

HMO-1003 Non-rotation bracket

HPO-0038 Replacement diaphragm

HPO-5072 Ball valve to actuator repair kit

ICI-1005 2" pressure gauge, 0–30 psi (0–2

Bar), back-connected, 1/8" MPT

Description and Application 1

Features 1

Models 1

Accessories and Replacement Parts 1

Dimensions 2

Speciﬁcations 2

Features

♦ Mounts on 1/2-inch and 3/8-inch round or 3/8-

inch square shafts.

♦ Units can rotate clockwise or counterclockwise

♦ Variety of options for securing the hub and

damper shaft

Description and Application

These pneumatic rotary actuators are designed for

use on VAV terminal units and other small dampers

in HVAC systems.

Models ending in “000” will mount to 1/2-inch

diameter damper shafts or (using the HLO-1011

shaft adapter) to 3/8-inch diameter shafts. Models

ending with a “001” will mount to 3/8-inch square

damper shafts.

Actuators may be mounted with either side toward

the damper to allow clockwise or counterclockwise

rotation. A non-rotation bracket is supplied with

each actuator and a variety of options are available

to lock the actuator’s drive hub to the damper shaft.

Speciﬁcations and design subject to change without notice.

Models

Actuators for 1/2-inch or 3/8-inch diameter shafts

MCP-3631-2000 3 to 12 psi range (21 to 83 kPa)

MCP-3631-3000 5 to 10 psi range (34 to 69 kPa)

MCP-3631-5000 8 to 13 psi range (55 to 90 kPa)

MCP-3631-8000 3 to 8 psi range (21 to 55 kPa)

Actuators for 3/8-inch square shafts

MCP-3631-3001 5 to 10 psi range (34 to 69 kPa)

MCP-3631-5001 8 to 13 psi range (55 to 90 kPa)

MCP-3631-8001 3 to 8 psi range (21 to 55 kPa)

MCP-3631 Series

Rotary Pneumatic Damper Actuator

CAUTION

Pneumatic devices must be supplied with

clean, dry control air. Any other medium (e.g.,

oil or moisture contamination) will cause the

device to fail.

Summary of content (2 pages)

PAGE 1
MCP-3631 Series Rotary Pneumatic Damper Actuator Description and Application These pneumatic rotary actuators are designed for use on VAV terminal units and other small dampers in HVAC systems. Models ending in “000” will mount to 1/2-inch diameter damper shafts or (using the HLO-1011 shaft adapter) to 3/8-inch diameter shafts. Models ending with a “001” will mount to 3/8-inch square damper shafts. Actuators may be mounted with either side toward the damper to allow clockwise or counterclockwise rotation.
PAGE 2
Dimensions All dimensions in inches (mm) 1/2" Diameter 3/8" Square NOTE: Damper Type Up to 1000 FPM 1000 to 2500 FPM 2500 to 3000 FPM Opposed Blades Without Seals 3 in-lb. per square foot 4.5 in-lb. per square foot 6 in-lb. per square foot Parallel Blades Without Seals 4 in-lb. per square foot 6 in-lb. per square foot 8 in-lb. per square foot Opposed Blades With Seals 5 in-lb. per square foot 7.5 in-lb. per square foot 10 in-lb. per square foot Parallel Blades With Seals 7 in-lb.