Product Overview

Details
© 2013 KMC Controls, Inc. 009-035-01E
All dimensions are in inches (mm)
KMC Controls, Inc.
19476 Industrial Drive
New Paris, IN 46553
574.831.5250
www.kmccontrols.com; [e-mail]
CAUTION
Pneumatic devices must be supplied with
clean, dry control air. Any other medium
(e.g., oil or moisture contamination) will
cause the device to fail.
VTD-1100 1/4" clevis pin, post mount
VTD-1205 Hairpin coer, post mount
VTD-1414 3-hole crank arm, 3/8" shas
VTD-1415 3-hole crank arm, 1/2" shas
VTD-1500 Positioner feedback arm
VTD-1634 Push rod, 5/16" X 3-1/4"
VTD-1920 1/2-13 hex nut used on VTD-0904
post
VTD-2101 1/2" ID lock washer used on
VTD-0904 post
VTD-2250 5# feedback spring; CMC-1001
VTD-2254 5# feedback spring; CMC-1002
VTD-2260 10# feedback spring; CMC-1001
VTD-2264 10# feedback spring; CMC-1002
VTD-9423 Replacement actuator diaphragm
Accessories/Replacement Parts
CMC-1001 Non-metallic positive positioner
MCP-0302 3–12 psi act. for MCP-1030 series
MCP-0303 5–10 psi act. for MCP-1030 series
MCP-0305 8–13 psi act. for MCP-1030 series
MCP-0306 10–15 psi act. for MCP-1030 series
MCP-0308 4–8 psi act. for MCP-1030 series
MCP-0335 8–13 psi Phoenix actuator
MCP-0352 3–12 psi act. for MCP-1130 series
MCP-0353 5–10 psi act. for MCP-1130 series
MCP-0355 8–13 psi act. for MCP-1130 series
MCP-0356 10–15 psi act. for MCP-1130 series
MCP-0358 4–8 psi act. for MCP-1130 series
VTD-0803 Ball joint, 1/4-20 male x 5/16-24"
female for end of actuator shas
VTD-0804 Ball joint, 1/4-20 male x 1/4-20"
female for use with VTD-1400
series crank arms
VTD-0902 Right-angle bracket for right-an-
gle mounted 3" and 4" actuators
VTD-0904 Rear post used on rear swivel
mounting of all 3" and 4" actua-
tors, used with VTD-0905
VTD-0905 Oset bracket, used with VTD-
0904 for post-mounting of all 3"
and 4" actuators