Manual

FlexStat 19 Operation Guide, Rev. R
(Advanced) Test
TEST
LCD/KEY TEST
The test menu merely tests the display’s pixels and
key functions (as verication during manufacturing).
NOTE: When seing a password, the Up buon
increases the alphanumeric value (0
through 9 and then A through Z). The
Down buon decreases the value. DONOT
FORGETTHEADMINPASSWORD!
The required password level is specied in the
prompt.
To lockthebuons after conguration is complete
(and disable further changes), select Locked UI
mode. See (Advanced) User Interface (UI) on page 21.
For additionalphysicalsecurityandprotection
fromvandalism, install the FlexStat inside a third-
party locking thermostat guard/cover (but proper
airow must be maintained).
Menu Items Access Levels
Menus User Operator Administrator
Home Screen * = Selectable, Default is User
Setpoint Adjust (Up/Down)
4* 4* 4*
System Mode (Auto/Heat/Cool/Off)
4* 4* 4*
Occupancy Override (On/Off)
4* 4* 4*
Fan Modes (Auto/On/Off)
4* 4* 4*
Main Menu* (Default is User)
About
4 4 4
Advanced
4 4
Alarm
4 4
Date/Time
4 4
Schedule
4 4
Setpoints
4 4
System
4 4
Trend Viewer
4 4 4
Advanced Menu
Application
4
Additional Setup
4
Control Basic Programs
4 4
Communication
4
Date/Time
4 4
Device
4
Inputs
4 4
Limits
4 4
Motion Sensor
4 4
Security
4
Trend Logs
4 4
Test
4 4
This chart shows conditions in which an administrator password is
set (is not 0000) and default password levels are used.