Application Guide
Table Of Contents
- Cover/Contents
- General Information (All Applications)
- Single-Zone Proportional Heating and Cooling Applications
- Pressure Dependent VAV Applications with MEP-4xx2
- Pressure Independent VAV Applications with CSP-4702
- Replacing a CSP-5001/5002
- Replacing a CEP-4xxx or CSP-40xx/42xx/44xx/46xx or CSE-484x
- Cooling or Heating
- Auto and Override (to Fully Open)
- Cooling with 3-Stage Reheat
- Cooling with 3-Stage Reheat and Night Setback/Setup
- Cooling with Heating Changeover
- Cooling with Heating Changeover and Electric Reheat
- Cooling with Heating Changeover and Hot Water Reheat
- Cooling with Hot Water Reheat
- Fan Induction with 2-Stage Electric Heat
- Dual Duct, Minimum Air from Cold Duct
- Pressure Independent VAV Applications with CSP-5001/5002
- Cooling or Heating
- Auto and Override (to Fully Closed or Fully Open)
- Cooling with 3-Stage Reheat
- Cooling with 3-Stage Reheat and Night Setback/Setup
- Cooling with Heating Changeover
- Cooling with Heating Changeover and Electric Reheat
- Cooling with Heating Changeover and Hot Water Reheat
- Cooling with Hot Water Reheat
- Fan Induction with 2-Stage Electric Heat
- Dual Duct, Minimum Air from Cold Duct
- Pressure Independent VAV and CAV Applications with CEP/CSP-4000 Series
- 9.1 VDC vs. 24 VAC Power Options
- Cooling
- Cooling with Morning Warm-Up
- Cooling with 3-Stage Reheat
- Cooling with Heating Changeover
- Cooling with Hot Water Reheat
- Fan Induction with 2-Stage Electric Heat
- Damper Tracking (Master/Slave)
- Dual Duct Heating and Cooling VAV
- Dual Duct Heat/Cool Constant Volume with Hot Deck Make-Up
- Barber Colman TP-81xx Thermostats Replacement Applications
- Index
CTE-5202 Analog Electronic Thermostat w/ LCD Display 60 Applications Guide, AN0912A Rev. H
© 2014 KMC Controls, Inc. AN0912A Rev. H
KMC Controls
19476 Industrial Drive
New Paris, IN 46553
574.831.5250; Fax 574.831.5252
www.kmccontrols.com; info@kmccontrols.com
L
Limits: 6, 23, 34
Loop
Integral Time: 6
Proportional Band: 6
M
Master/Slave: 51
MEP-4002 Actuator: 16
Minimum Setpoint Differential: 6
Morning Warm-Up: 5, 7, 27, 28, 38, 39, 46
MP-52xx “Beer Can” Actuators: 54, 56, 57, 58
O
Offset: 6
Operation: 5
Outputs: 5
Override: 18, 23, 34
P
PID Loop: 6
Pressure Control, Static: 19
Pressure Dependent VAV: 16
Pressure Independent VAV: 19, 32, 43
Proportional Band: 6
R
RA and DA Heating: 12
REE-1013 Relay Module, Offset: 51
REE-4001 Relay Module, 3-Stage Reheat: 47
REE-4002 Relay Module, Fan with 2-Stage Reheat: 50
REE-4006 Relay Module, Proportional Reheat for NC
Valves: 49
REE-4106 Relay Module, Proportional Reheat for NC
Valves: 49
REE-5001 Relay Module, 3-Stage Reheat: 24, 25, 27,
35, 36, 38, 47
REE-5002 Relay Module, Fan with 2-Stage Reheat:
30, 41, 50
REE-5106 Relay Module, Proportional Reheat for NC
Valves: 49
S
Schneider Electric TP-81xx: 54
Sequences: 6, 7
Setback: 5, 25, 36
Setpoint
Adjusting: 6
Troubleshooting: 10
Span: 6
SSE-1001/1002 Flow Sensors: 45, 47, 49, 50, 51, 52,
53
SSE-2001/2002 Flow/Temp. Sensors: 46, 48
SSS-10xx Flow Sensors: 19
Standby (Setback): 5
Static Pressure Controller: 19
STE-140x Duct Sensor: 37, 38, 39
STE-1454/1455 Strap-On Temp. Sensor: 15
Support Files: 3
System Menu: 6
T
TAC TP-81xx: 54
Temperature
Offset: 6
Scale (F or C): 6
Troubleshooting: 10
TP-81xx Thermostats Cross-Reference: 54
TP-8101/8102/8103 Replacement: 55, 56
TP-8124/8125 Replacement: 57, 58
Troubleshooting: 10
TTE-2001 Duct Sensor/Transmitter: 37, 38, 39
U
Unoccupied: 5, 25, 36
V
Valve: 12, 13, 14, 15, 28, 29, 39, 40, 49
VAV (Variable Air Volume)
Pressure Dependent: 16
Pressure Independent: 19, 32, 43
VEB-43/46 Series Valves: 12, 13, 14, 15, 28, 29, 39,
40
VEP-12/22/34 Series Valves: 49
W
Warm-Up. See Morning Warm-Up
Web Site: 3
Wiring: 10