Application Guide

General Information (All Applications) 4 CTE-5202 Applications Guide, AN0912A Rev. H
Important Notices
The KMC logo and KMC Controls are registered
trademarks of KMC Controls, Inc. Other products
and name brands mentioned may be trademarks of
their respective companies or organizations.
All rights reserved. No part of this publication may
be reproduced, transmied, transcribed, stored in a
retrieval system, or translated into any language in
any form by any means without the wrien permis-
sion of KMC Controls, Inc.
The material in this document is for information
purposes only. The contents and the product it de-
scribes are subject to change without notice. KMC
Controls, Inc. makes no representations or warran-
ties with respect to this document. In no event shall
KMC Controls, Inc. be liable for any damages, direct
or incidental, arising out of or related to the use of
this document.
Accessories
CSP-4702 Dierential
pressure VAV
controller/ac-
tuator
HMO-1161 Wall plate, al-
lows mounting
to horizontal 2
x 4", 4 x 4", or
other boxes,
light almond
HMO-1161W HMO-1161 in
white
HPO-0044 Replacement
cover hex
screws
HPO-1161 Foam insulating
gasket
MEP-4xx2 Proportional
actuators
REE-50xx Electric relay
modules, stag-
ing and reheat
STE-140x Duct tempera-
ture (Type III)
sensors
STE-1454/1455 Strap-on tem-
perature (Type
III) sensors
VEB-4xxxxxxx Valves (with
proportional
actuators)
NOTE: See sample applications for additional
information.