Application Guide

Table Of Contents

Pressure Dependent VAV Applications with MEP-4002 16 CTE-5202 Applications Guide, AN0912A Rev. H

Pressure Dependent VAV

Applications with MEP-4xx2

This section gives sample applications for using the

CTE-5202 with the MEP-4xx2 actuator in pressure

dependent VAV applications.

The MEP-4xx2’s default direction is CCW to close

(CW to open or CW with increasing voltage), but

this can be reversed by a switch during installation

and conguration.

See also the MEP-4000 Series Installation Guide.

For additional applications, see Pressure Indepen-

dent VAV Applications with CSP-5001/5002 on page

32 and make the corresponding wiring adjustments

for power to the MEP-4xx2 and CTE-5202.

MEP-4xx2

24 VAC CTE-5202

Damper

SET

POINT