Product Overview

ManualsBrandsKMC Controls ManualsHeating SuppliesDual-Setpoint Heat & Cool Horizontal °F Thermostat (55° to 85°F)

Table Of Contents

Features

◆ Dualsetpointforheating/coolingapplications

◆ Adjustablemin/maxtemperaturelimits

◆ AdditionaloutputavailableforcontrolofKMC

REEseriesrelaymodules

◆ Visibleorhiddensetpointindicator

◆ Heatingandcoolingowadjustments

Description and Application

TheCTE-1003electronicthermostatisdesignedto

beusedwithspecicCEE/CEP/CSE/CSP-4000series

controller-actuatorsforcontrollingdamperactuators

and/orvalvesinHVACsystems.Theabilitytoadjust

minimumandmaximumlimitsisatthethermostat

ratherthanatthecontroller.Thisisadualsetpoint

thermostatforheatingandcoolingapplications.

Severalmountingmethodsareavailable.

Anadditionaloutputisprovidedforcontrolofop-

tionalKMCREE-4000seriesrelaymodules.This0–6

VDCoutput(T3)isnotrestrictedbytheminimum

andmaximumcontrolpoints.

Coverconstructionallowsforthesetpointindicator

andthermometertobeeithervisibleorconcealed.

Optionalaccessoriesincludeaninsertforconcealing

thewindowandstopstolock/restrictsetpoint

adjustments.

CTE-1003thermostatsareintendedforusewiththe

followingKMCcontroller/actuators:

CEE-4000Series

CEP-4000Series

CSE-4000Series

CSP-4000Series

AnoptionalXEE-40029.1VDCpowersupply

modulecanpowerthethermostat.Thenthe

thermostatcanbeused(withoutthecontroller-

actuator)tocontroladamperorvalveoperatedby

anMEPseriesactuatorortocontrolotherdevices

viaoptionalREE-4000seriesrelays.

Forsimilarthermostatswithtemperatureaveraging

capabilityandalteredproportionalbandsforfanbox

relayapplications,seetheCTE-1103 Data Sheet.

Speciﬁcations and design subject to change without notice.

CTE-1003

Room Thermostat, Dual Setpoint, Heat/Cool

Models

Accessories

Description and Application 1

Features 1

Models 1

Accessories 1

Details 2

Speciﬁcations 2

NOTE: For many applications, the CTE-1003

can be replaced by a CTE-5202 electronic

thermostat with an LCD display. For

details, see the CTE-5202 Data Sheet and

the CTE-5202 Applications Guide.

HFO-0026 Blankinginsert

HFO-0027 Setpointstops

HMO-5001 Toggleboltassembly

HMO-5002 Insulatingbackplate,1-1/8"deep

HMO-5007 Insulatingbackplate,1-11/16"

deep

HSO-5001 Calibrationtestleads

REE-4xxx Relaymodules

XEE-4002 9.1VDCpowersupplymodule

CTE-1003-10 °F,horizontal

CTE-1003-11 °C,horizontal

Summary of content (2 pages)

PAGE 1
CTE-1003 Room Thermostat, Dual Setpoint, Heat/Cool Description and Application The CTE-1003 electronic thermostat is designed to be used with specific CEE/CEP/CSE/CSP-4000 series controller-actuators for controlling damper actuators and/or valves in HVAC systems. The ability to adjust minimum and maximum limits is at the thermostat rather than at the controller. This is a dual setpoint thermostat for heating and cooling applications. Several mounting methods are available.
PAGE 2
Details All dimensions are in inches (mm). Specifications Supply Voltage 9.1 VDC ±5% Output Range 0 to 6 VDC Range 55° to 85° F (13° to 29° C) Proportional Band 2° F (1.1° C) Thermostat Action Cooling Heating Cover Type Direct Acting Reverse Acting Furnished, with window Material Light almond flame-retardant plastic Weight 3.5 oz. (99 grams) Approvals SASO PCP Registration KSA R-103263 © 2013 KMC Controls, Inc. 19476 Industrial Drive, New Paris, IN 46553 574.831.