Selection Guide
Table Of Contents
- KMC Sensors and Thermostats
- Thermostats (Integrated Room Temperature Sensor Plus Controller)
- Temperature Sensors (Room)
- Temperature Sensors (Other)
- Humidity Sensors
- CO, CO2, and Smoke Sensors
- Flow and Pressure Sensors
- Refrigerant Monitor
- Miscellaneous
- Digital/Electronic Handling Precautions
- Important Notices
- Support
6 AG151026B© 2015 KMC Controls, Inc. Specifications and design subject to change without notice AG151026B
Support
Additional resources for product specications, installation, conguration,
application, operation, programming, upgrading and much more are available on
the KMC Controls web site (www.kmccontrols.com). To see all available les,
log-in to the KMC Partners site.
Important Notices
The KMC logo and KMC Controls are registered trademarks of KMC Controls,
Inc. Other products and name brands mentioned may be trademarks of their
respective companies or organizations.
All rights reserved. No part of this publication may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language in any
form by any means without the written permission of KMC Controls, Inc.
The material in this document is for information purposes only. The contents
and the product it describes are subject to change without notice. KMC
Controls, Inc. makes no representations or warranties with respect to this
document. In no event shall KMC Controls, Inc. be liable for any damages, direct
or incidental, arising out of or related to the use of this document.
Digital/Electronic Handling Precautions
For digital and electronic sensors, thermostats, and controllers, take reasonable
precautions to prevent electrostatic discharges to the devices when installing,
servicing, or operating them. Discharge accumulated static electricity by
touching one’s hand to a securely grounded object before working with each
device.
NOTICE
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
SENSITIVE DEVICES