Application Guide

CSP-5001/5002 VAV Flow Controller-Actuators 21 Applications Guide, Rev. B
© 2013 KMC Controls, Inc. 876-035-02B
KMC Controls, Inc.
19476 Industrial Drive
New Paris, IN 46553
574.831.5250
www.kmccontrols.com
[e-mail]
NOTE: For use with the CTE-5202 thermostat
instead of the CTE-5100 series, see the
CTE-5202 Applications Guide.
Index
A
Air Flow Sensor 4
Applications 11
Auto, Override to Fully Closed, or Override to Fully
Open 12
C
Calibration 7
CCW vs. CW Rotation 2
CFM 6
Changeover 15, 16, 17
Checkout 7
Cooling or Heating 11
Cooling with 3-Stage Reheat 13
Cooling with 3-Stage Reheat and 10 Degree Night
Setback/Setup 14
Cooling with Heating Changeover 15
Cooling with Heating Changeover and Electric Reheat
16
Cooling with Heating Changeover and Hot Water
Reheat 17
Cooling with Hot Water Reheat 18
Cross-Reference, Thermostat 8
CTE-5100 Series Cross-reference 8
CTE-5101 11, 12, 20
CTE-5102 11
CTE-5103 15, 19
CTE-5104 13, 14, 18
D
Dual Duct, Minimum Air From Cold Duct 19
F
Fan Induction with 2-Stage Electric Heat 20
Flow Limits 6
Flow Sensor 3
L
Limits 6
M
Minimum and Maximum Flow Limits 6
O
Override 12
R
REE-1005 15, 16, 17
REE-5001 13, 14, 16, 17
REE-5002 20
Reheat 13, 14, 16, 17, 18, 20
Remote Sensor 9
Rotation 2, 3, 4
S
SSS-100x 3
STE-100x 15
T
Testing 5
Thermostat 7
Troubleshooting 5
TTE-2001 15
TTE Series 9
V
Valve 18
VNOM (CFM) Range Setting 6
Voltage/Velocity Chart 3
W
Wiring 4