Product Overview

Accessories
VTD-1500 Feedbackarm
VTD-2250 Spring,3"stroke,5psispan
VTD-2282 Spring,3"stroke,7psispan
VTD-2260 Spring:3"stroke,10psispan
VTD-2251 Spring,4"stroke,5psispan
VTD-2261 Spring,4"stroke,10psispan
VTD-2272 Spring,6"stroke,3psispan
VTD-2252 Spring,6"stroke,5psispan
VTD-2262 Spring,6"stroke,10psispan
VTD-2500 Replacementin-linerestrictor
(forCMC-1001usewith3"and
4"actuators)
Description
TheKMCCMC-1001non-metallicpositiveposition-
erisdesignedtoworkwithKMCpneumaticdamper
actuators.CMC-1001scanbefactory-mountedor
eld-installedon3",4",or6"strokeactuators.
TheCMC-1001isdesignedtobeusedwithactuators
containingan8to13psispringsothatequalforce
canbeobtainedonbothpowerandreturnstrokes.
TheCMC-1001replacespositionersonanyMCP
actuatorwiththedigit1inthehposition(MCP-
xxxx-1xxx).
Thestart-pointisadjustablefrom3to10psi.The
overallspanisadirectfunctionoftheselectedfeed-
backspring,whichisorderedseparately(seeAcces-
soriessection).
NOTE: Forall3"and4"actuators,insertthe
(included)VTD-2500restrictorintheline
betweenPort#1andtheactuator.The
restrictorisnotneededon6"actuators.
Features
◆ Factorymountedoreldinstalledon3",4",or6"
strokeactuators
◆ Adjustablestartpoint
◆ Adjustableoverallspan(withchoiceofspring)
Specifications and design subject to change without notice.
CMC-1001
Non-Metallic Positive Positioner
Specifications
Supply Pressure 20to30psi(138to207kPa)
Air Consumption 14.4scim@20psi(3.93mL/s@
138kPa)
Connections 3/16"(5mm)nipplesfor1/4"
(6mm)O.D.polyethylene
tubing
Port Markings
Center SupplyPressure
“1” OutputtoActuator
“2” SignalInput
Material
Body Flame-retardantplastic
Diaphragms Neoprene
Output Capability 0tosupplypressure
Weight 4oz.(113grams)
Approvals RoHScompliant
Temperature Limits
Operating 40to120°F(4to49°C)
Shipping –40to140°F(–40to60°C)
CAUTION
Pneumatic devices must be supplied with clean, dry
control air. Any other medium (e.g., oil or moisture
contamination) will cause the device to fail.
Description 1
Features 1
Accessories 1
Specifications 1
Details 2