Install Instructions

S ect i on 4: Confi guring t he cont rol l ers
This topics in this section are advanced topics for control technicians and engineers.
The configuration functions that are accessible through an STE-8000 series sensor are all of
the values and settings that are entered during the installation and commissioning of a VAV
terminal unit. Typically, these functions do not change after the installation and
commissioning process.
To set up the configuration functions, you will need the following items and information.
l Details about the VAV terminal unit including the configuration for fans and reheat.
l An STE-8001 or STE-8201 to use as a configuration tool.
l The building automation system plans for controllers connected to a network.
Users may change the active heating and cooling setpoints without accessing the
configuration functions. This procedure is covered in the topic Changing the room setpoint
on page 21.
Note: The instructions for the configuration functions cover all of the functions that an STE-8000
sensor can set up in the SimplyVAV series of controllers. Not all functions are available on
every model of controller.
Configuration topics
Getting started with configuration 24
Entering system temperature setpoints and limits 25
Configuring the VAV Box options 29
Set the airflow setpoints 32
Advanced options 35
Restore Application 38
SimplyVAV
Revision G 23