Install Instructions

Table Of Contents
Typically, airflow sensors are supplied by the manufacturer as part of the VAV terminal unit.
If a sensor is needed, choose a sensor listed in the topic Accessories and replacement
parts on page 10.
Connecting inputs and outputs
SimplyVAV series controllers have preconfigured inputs and outputs to support only the
supplied programs and applications.
l For input and output connection information, see the topic Application drawings on
page 44.
l To connect room temperature sensors, see the topic Connecting room temperature
sensors on page 17
l To connect a DAT sensor, see the topic Connecting a DAT sensor on page 18.
l For the BACnet object descriptions of the inputs and outputs, see the topic BACnet
objects on page 68.
Section 2: Installing the controllers KMC Controls, Inc.
16 Revision G