Installation Guide Manual

Procedure Detailed steps STE display
10 Set the minimum
temperature differential
setpoint.
The minimum allowable temperature value
between the cooling and heating setpoints.
1.
Press the or buttons to set the
differential setpoint. The setpoint will change
in 1° increments.
2.
Press the
Set
Point
button to save the setpoint and
advance to the next function.
O5
DIFF
11 Set the standby
differential setpoint.
The standby setpoint is calculated by adding or
subtracting the offset value to or from the value
of the occupied setpoint.
1.
Press the or buttons to set the standby
differential setpoint. The setpoint will change
in 1° increments.
2.
Press the
Set
Point
button to save the setpoint and
advance to the next function.
OS
12 Select a new
configuration function or
exit.
1.
Press the or buttons to select one of the
following:
BOX, FLOW, ADVC, or RSTR options
BACK to choose another configuration
function.
EXIT to return to the temperature display.
2.
Press the
Set
Point
button to select the next function.
STPT
Procedure to set the temperature setpoints (continued)
Section 4: Configuring the controllers SimplyVAV
30 Revision E