Installation Guide Manual

Connecting room
temperature
sensors
Connect any of the following sensors to the RJ-45 thermostat and sensor jack.
The controller automatically detects the type of sensor. No programming or
configuration is required.
STE-6010
STE-6014
STE-6017
STE-8001
STE-8201
Connect the controller to sensors with standard Ethernet cables up to 75 feet
long. See the installation guide supplied with the sensors for sensor
installation instructions.
Illustration 2–4 Connecting to a sensor
Ethernet cable
Maximum 75 feet
SimplyVAV Section 2: Installing the controllers
Revision E 19