Install Instructions
Table Of Contents
- Contents
- Section 1: About the controllers
- Section 2: Installing the controllers
- Section 3: Changing the room setpoint
- Section 4: Configuring the controllers
- Section 5: Balancing airflow
- Section 6: Application drawings
- Section 7: Sequences of operation
- Section 8: System integration and networking
- Appendix A: K-factors
- Index
S ect i on 6: Appl i cat ion drawi ngs
This section covers the drawings, materials, and instructions for specific VAV
applications.
Each SimplyVAV model is designed for a specific set of applications. The following topics
are for control technicians and engineers that will plan for and install controllers for
SimplyVAV applications.
Submittal sheets for all of these applications are available from the Resources page at
www.SimplyVAV.com.
Application drawings in this section
Cooling or heating without reheat 45
Staged reheat 46
Modulating reheat 47
Time proportional reheat 48
Floating reheat 49
Dual-duct application 50
SimplyVAV
Revision G 44