Install Instructions

Procedure Detailed steps STE display
9 Set the maximum limit for
fan speed.
Not used for all models.
1. Press the or buttons to set the
maximum limit for the fan speed. The
setpoint will change in 1% increments.
2. Press the
Set
Point
button to save the setpoint and
advance to the next function.
1OO
MAXF
10Set the dual duct
minimum airflow.
Not used for all models.
This setpoint is for the minimum airflow when a
dual-duct system is at temperature setpoint.
1. Press the or buttons.
2. Press the
Set
Point
button to save the setpoint and
advance to the next function.
1OO
DLMN
11Select a new
configuration function or
exit.
1. Press the or buttons to select one of the
following:
l STPT, BOX, ADVC, or RSTR options
l BACK to choose another configuration
function EXIT.
2. Press the
Set
Point
button to select the next
function.
FLOW
Procedure to set the airflow setpoints (continued)
Section 4: Configuring the controllers KMC Controls, Inc.
34 Revision G