Install Instructions
Table Of Contents
- Contents
- Section 1: About the controllers
- Section 2: Installing the controllers
- Section 3: Changing the room setpoint
- Section 4: Configuring the controllers
- Section 5: Balancing airflow
- Section 6: Application drawings
- Section 7: Sequences of operation
- Section 8: System integration and networking
- Appendix A: K-factors
- Index
Procedure Steps STE display
Note: If Password 1 has not previously been
entered, the display will change to the
occupied cooling setpoint display after Step
1.
3 Set the active cooling
setpoint.
1. Press the or buttons to change the
cooling setpoint temperature. The setpoint
changes in increments of 0.5 degrees.
2. Press the
Set
Point
button to save the value.
The display advances to set the heating
setpoint.
745
COOLING
4 Set the active heating
setpoint.
1. Press the or buttons to change the
heating setpoint temperature. The setpoint
changes in increments of 0.5 degrees.
2. Press the
Set
Point
button to save the value.
The display returns to the temperature
display.
685
HEATING
Changing room setpoints (continued)
Section 3: Changing the room setpoint KMC Controls, Inc.
22 Revision G