Submittal Sheet
Table Of Contents
- Contents/Cover
- Description and Application
- Features
- Configurability
- Models
- Application/Model Selection Guide
- Specifications, General
- Specifications, Motion Sensor
- Specifications, CO2 Models Only
- Demand Control Ventilation (DCV)
- Accessories
- Dimensions and Connectors
- Sample Installation
- Product and Documentation Awards
- Support
8
Accessories
Relays (External)
REE-3211 (R1/R2/R3) SPDT, multi-
voltage control relay, 1.2
VA
REE-3112 (HUM) SPDT, 12/24
VDC control relay
Sensors (External)
CSE-110x (FST) dierential air
pressure switch
STE-1402 (DAT) duct temperature
sensor w/ 8" rigid probe
STE-1416 (MAT) 12' (exible) duct
averaging temp. sensor
STE-1451 (OAT) outside air temp.
sensor
STE-6011 Remote space temp.
sensor
SAE-10xx Remote CO
2
sensor, space
or duct
STE-1454/1455 (W-TMP) 2" strap-on water
temp. sensor (with or without
enclosure)
Transformers, 120 (or more) to 24 VAC (TX)
XEE-6111-040 40 VA, single-hub
XEE-6112-040 40 VA, dual-hub
XEE-6311-050 50 VA, dual-hub
XEE-6311-075 75 VA, single-hub
XEE-6311-100 96 VA, dual-hub
Valves (Heating/Cooling/Humidification)
VEB-43xxxBCL (HUMV/CLV/HTV) Fail-safe
control valve, w/ MEP-4x52 pro-
proportional actuator, 20 VA
VEB-43xxxBCK (VLV/CLV/HTV)
control valve w/ MEP-
4002 proportional
actuator, 4 VA
VEZ-4xxxxMBx (VLV/CLV/HTV) fail-
safe control valve, 24 VAC, 9.8
VA
NOTE: For details, see the respective product data
sheets and installation guides. See also the
FlexStat Application Guide.
Damper (OAD/RTD) Actuators (Fail-Safe)
MEP-4552 5.6 ft
2
max. damper area, 45 in-
lb., proportional, 19 VA
MEP-7552 22.5 ft
2
max. damper area, 180
in-lb., proportional,
25 VA
MEP-7852 40 ft
2
max. damper
area, 320 in-lb., pro-
portional, 40 VA
Mounting Hardware
HMO-10000 Horizontal or 4 x 4 handy
box wall mounting plate for
BAC-12xxxx models
(not needed for BAC-
13xxxx/14xxxx models),
light almond (shown)
HMO-10000W HMO-10000 in white
HPO-1602 Replacement backplate for
BAC-12xxxx models
HPO-1603 Replacement backplate
for BAC-13xxxx/14xxxx
models (shown)
SP-001 Screwdriver (KMC branded)
with at blade (for termi-
nals) and hex end (for cover
screws)
Network Communications and Firmware
HTO-1103 FlexStat rmware
upgrade and BAC-
14xxxx CO
2
calibra-
tion adapter kit
KMD-5567 Network surge
suppressor
KMD-5575 Network repeater/
isolator
KMD-5576 EIA-485 to USB
Communicator
KMD-5624 PC data port (EIA-485)
cable (FlexStat to USB Commu-
nicator)—included with
the KMD-5576 (buy for
third-party EIA-232
interfaces)