Brochure

WED 9/3 5:43 PM
COOL:
OCC:
FAN:
HUM: 31%RH
(Only Some Display Screens Are Shown)
MAIN MENU
ABOUT
ADVANCED
ALARM
DATE/TIME
SCHEDULE
SETPOINTS
SYSTEM
ADVANCED
APPLICATION
CB PROGRAMS
COMMUNICATION
DATE/TIME
DEVICE
INPUTS
LIMITS
APPLICATION
DEGREES SCALE: °F
APP:
OPT: 1H/1C
ADDITIONAL SETUP
ROOF TOP
SYSTEM MODE
SYSTEM ENABLE:
AUTO
OCCUPANCY OVERRIDE
OCC OVERRIDE:
OFF
FAN MODES
UNOCC:
OCC: AUTO
AUTO
Override
Setpoint Adjustment
Home Screen
Override Screens
Configuration
Configuration Screens
FlexStat Introduction
What if you could have flexible, set-and-forget
control over the indoor environmental quality
(IEQ) in your building without the expense of a
large building automation system? Well, now you
can, with the KMC FlexStat. FlexStat IEQ control
for your space optimizes temperature, humidity,
and ventilation for your health and comfort...while
saving energy at the same time.
The FlexStat series of intelligent temperature/
humidity/motion/CO
2
-sensing, wall-mounted,
thermostat/controllers are native BACnet
Advanced Application Controllers (B-AAC) for
connection with a BACnet system. The FlexStat
simplifies networked zone control for common
HVAC equipment—such as packaged rooftop
units, air handlers, fan coil units, and heat
pumps—which can be controlled via the on-
board libraries of programs built into the FlexStat.
The on-board library of programs permits rapid
configuration of a wide range of HVAC control
applications via the FlexStat’s easy-to-use display
and buttons. Plus, the standard library can be
customized (using BACstage
™
or TotalControl
™
)
to meet the unique site needs and application-
specific requirements of a particular project.
With its built-in library of applications, just one
FlexStat model can replace multiple competitor
models. With a single BAC-120163CW, for example,
all these application options can be selected from
the menus:
• Air handling unit, with proportional heating and
cooling valves, and with optional economizer,
dehumidification, and/or fan status.
• Fan coil unit, 2-pipe or 4-pipe, proportional or
2-position valves, with optional dehumidification
(with 4-pipe option) and/or fan status.
• Heat pump unit, with up to two compressor
stages, and with optional auxiliary heat,
emergency heat, dehumidification, and/or fan
status.
• Roof top unit, with up to two H/C stages, and
with optional economizer, dehumidification,
and/or fan status.
A one-size FlexStat “fits all.”
Flexible Features
Easy to configure and easy to use, the FlexStat
has many features, including the following:
• User-friendly, high-contrast, backlit, dot-
matrix LCD display with five buttons for easy,
plain-English menu-driven configuration and
operation.
• Multiple display options include selectable
space temperature display precision, degrees
F/C toggle, rotation values, display blanking,
hospitality mode, and locked mode.
• Temperature sensing (standard) and optional
humidity, motion (with effective range of up to
33 feet), and CO
2
sensing (see CO
2
and DCV
Options section on the back page for details).
• Six analog inputs for additional configurable
remote external sensors, such as remote
space temperature (with averaging, highest,
and lowest options), remote CO
2
, outside air