Installation Guide
Table Of Contents
- Managing a KMC Conquest AFMS
- Setting AFMS Parameters
- Calibrating the AFMS's Sensors
- Running AFMS Learning Mode
- Controlling Airflow with an AFMS
- Monitoring with an AFMS
- Accessing the Damper Characterization Table
- Important Notices
- Prerequi
- Setting
- Checking
- Interpre
- Manually
- Enabling
- Controll
- Controll2
- Commandi
- Monitori
9.
Select ON for Learn Damper Span.
Note: Before the AFMScontroller can run Learning Mode, it must learn the minimum and maximum
incline of the damper using the inclinometer.
10.
Select Save.
Note: "The process of updating points is successfully started" appears briefly. When the damper has
stroked the opening, Damper Span Learned will report LEARNED.
Continue to
Calibrating the AFMS's Sensors
on page 6.
KMC AFMS Commander Application Guide 5 AG230215A