Installation Guide
Table Of Contents
- Managing a KMC Conquest AFMS
- Setting AFMS Parameters
- Calibrating the AFMS's Sensors
- Running AFMS Learning Mode
- Controlling Airflow with an AFMS
- Monitoring with an AFMS
- Accessing the Damper Characterization Table
- Important Notices
- Prerequi
- Setting
- Checking
- Interpre
- Manually
- Enabling
- Controll
- Controll2
- Commandi
- Monitori
Note: See
Controlling Airflow with an AFMS
on page 10 for how to set the outside air damper to the
required positions for the measurements.
Note: See
Monitoring with an AFMS
on page 12 for where to find the sensor readings.
Continue to
Managing a KMC Conquest AFMS
on page 3.
Verifying the Damper Characterization Data
Should the damper characterization data require verification, measurements should only be made using NIST-
traceable instruments and the method described in ASHRAE Standard 111. (See the details in
Manually Entering
Damper Characterization Data
on page 14.)
KMC AFMS Commander Application Guide 15 AG230215A