User Manual

Computer
SPECIFICATION:
COUNT (CNT) ----------------------------------------------------------------------------- 0~9999
TIME ----------------------------------------------------------------------------------------- 0:00~99:59
CALORIE (CAL)---------------------------------------------------------------------------- 0~9999
STRIDES/MIN (REPS/MIN) ------------------------------------------------------------ 0~9999
OPERATION PROCEDURES:
1. AUTO ON/OFF
▲ The system turns on when any key is pressed or when it gets a signal input from
the sensor.
▲ The system turns off automatically when there is no signal input or no key is
pressed for approximately 4 minutes.
2. MODE (SELECT)
▲ This key lets you to select and lock on to a particular function you want.
▲ Keep pressing on this key for 3-4 seconds, the monitor will get reset.
3. RESET
Press this key, all datas will be return to zero.
FUNCTION:
1. COUNT (CNT): Automatically accumulates workout times when starting exercise.
2. TIME: Press the MODE(SELECT) key until pointer lock onto TIME. The total
working time will be shown when starting exercise.
3. CALORIE (CAL): Press the MODE(SELECT) key until pointer lock on to
CALORIE(CAL). The calories burned will be displayed when starting exercise.
4. STRIDES/MIN (REPS/MIN): Displays current Speed during workout time.
5. SCAN: Automatically display the following functions every 4 seconds in the order:
TIME → CALORIE (CAL) → STRIDES/MIN (REPS/MIN)
NOTE
Without any signal input in 4-5 minutes, the LCD display will be shut off automatically.
When there is signal input, the monitor automatically turns on.
If there is improper display on the monitor, please replace the battery to have a good
result. The monitor use 1 piece “1.5V AAA” battery.