User's Manual

14 13

10. OPR/STB: Disables/Enables the amp. The transceiver signal goes directly to the selected antenna

when the button is in standby.

11. Antenna Switch Zone: Manually select antenna 1,2 or 3. The button illuminates the selected antenna

manual or automatically.

12 Alarm Reset Button. Quickly restore operation after an alarm shutdown. Before resetting read the

error message and find the cause of the problem.

13 Setup Button: Open the general settings screen.

14. Fan Max Button: Sets the fan speed to maximum or automatic (default). If the temperature is

greater than 45°C/113°F, the fan will run in maximum speed. Note: For prolonged operation or DIGI

MODE keep the fan at maximum speed.

15. Bands Button: Opens the manual band selection tab. Note: The amplifier is not operable if the bands

tab is showing, as a selection must be made.

FULL MAIN SCREEN VIEW. QR CODE SCREEN VIEW.

Note: Use your smartphone camera to scan the QR codes to access Features, Manual and MERCURY LUX

Forum.

Through the forum on our platform, you will be able to share experiences and exchange questions with other

MERCURY LUX users.