Product Manual

Page 10 of 15
5. Carefully disconnect the hose from its connection and remove it.
6. Route a new equivalent type and size hose through guide/rollers to the old hose connection point.
7. Use Teflon tape or pipe sealant on the hose fitting threads then screw it into the connection fitting
on the reel. Note: To avoid damage to a swivel connection, use a wrench to support the swivel
while tightening the hose.
8. Re-install any hose clamps and the hose stop/block as noted in step 2.
9. Carefully release the drum latch, and slowly allow the hose to wind onto the reel.
10. Apply Teflon tape or pipe sealant to the outlet fitting on the new hose then attach it to a desired
tool, or nozzle. Pressurize the reel and check all the connections for leakage.
11. If needed, adjust the spring tension. See Spring Tension Adjustment in the Operation section.