Product Manual

Page 10 of 25
 Do not weld on the cylinder
 Always secure the cylinder upright to a cart or stationary object.
 Keep cylinders away from welding or electrical circuits.
 Use the proper regulators, a gas hose, and fittings for the specific application.
 Do not look into the valve when opening it.
 Use protective a cylinder cap whenever possible.
⚠CAUTION
Proper Care, Maintenance, and Repair
 Always have power disconnected when working on internal components.
 Do not touch or the handle the PC board without being properly grounded with a wrist strap.
Put the PC board in a static proof bag to move or ship.
 Do not place hands or fingers near moving parts like the drive rolls of a fan.
Specifications of Welder
Item
Specification
Power Supply
120V, 20A, 50/60 Hz, Single Phase
No-Load Voltage
76V DC
Output Range
20 to 75A DC
Duty Cycle
20% @ 75A; 60% @ 43A; 100% @ 33A
Suggested Electrodes
E6013, E7014, E7018, Stainless Steel
Electrode Diameter
1/16 inch to 3/32 inch
Dimensions
15” x 4-3/4” x 9-7/8”
Weight
7-3/4 lb.