Product Manual

Page 6 of 12
 Use only accessories that are recommended by the manufacturer for use with your product.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.
 Keep guards in place and in working order. Never operate the product without the guards in place.
Specific Operation Warnings
⚠WARNING
 Always wear the proper protective equipment including ANSI Z87.1 compliant eye protection, a
welding helmet, and welding gloves.
 Do not exceed the rated load capacity of 300 lb.
 Never sit or stand on the welding table.
 Use only on a level, hard surface.
 Inspect before each use. Do not use if parts are damaged.
 Keep the table clean for optimal performance. Wipe away dust and debris from the table top and
legs.
 Not for use by or around children.
Main Parts of Table
Subassembly
Table Top
Support Leg
Hardware Bag
Before Each Use
⚠WARNING
 Inspect the general condition of the welding table. Check for loose hardware misalignment,
binding of parts, or cracked and broken parts.
Operating Instructions
⚠WARNING
 Always wear the proper protective equipment including ANSI Z87.1 compliant eye protection, a
welding helmet, and welding gloves.
 Do not exceed the rated load capacity of 300 lb.
 Be aware of dynamic loading! Sudden load movement may briefly create excess load causing
product failure.