Portable Folding Welding Table Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
® Thank you very much for choosing a Klutch product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This welding table is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Packaging Contents .............................................................................................................................. 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information .................
Intended Use The Klutch Portable Folding Welding Table gives you a steady, flame-proof surface for welding parts and components. Designed for conductivity, connect your welding clamp directly to the welding table, safely out of the way of slag and spatter. Adjustable angle and fence give you a variety of welding options. Packaging Contents Table Top Owner’s Manual 2 Support Legs Hardware Bag Technical Specifications Property Table Dimensions Maximum Weight Capacity Specification 30 in.
⚠WARNING WORK AREA SAFETY Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas may put you dangerously close to cutting tools and rotating parts. Do not use the product where there is a risk of causing a fire or an explosion; e.g., in the presence of flammable liquids, gases, or dust.
Use only accessories that are recommended by the manufacturer for use with your product. Accessories that may be suitable for one product may create a risk of injury when used with another tool. Never use an accessory that has a lower operating speed or operating pressure than the tool itself. Keep guards in place and in working order. Never operate the product without the guards in place. Specific Operation Warnings ⚠WARNING Always wear the proper protective equipment including ANSI Z87.
Never sit or stand on the welding table. Use only on a level, hard surface. Inspect before each use. Do not use if parts are damaged. Keep the table clean for optimal performance. Wipe away dust and debris from the table top and legs. Use only for the intended purpose. Do not sit or stand on the table. Use ONLY on a flat, level, and hard surface. Not for use by or around children.
3. Lock the two hooks (4). After Each Use ⚠WARNING Wipe external surfaces of the table with a clean cloth. Maintenance Maintain the table by adopting a program of conscientious repair and maintenance in accordance with the following recommended procedures. It is recommended that the general condition of any tool be examined before it is used. Keep your tool in good repair. Keep handles dry, clean, and free from oil and grease. The following chart is based on a normal operation schedule.
Parts Diagram Parts List Part Number 1 2 3 4 5 6 7 8 9 10 11 12 13 Part Description Table Top Inner Support Leg Out Support Leg Hook Plastic Inner Sleeve Hex Bolt M8x75 Locknut Hex Bolt M8x75 Shackle Locknut M6 Washer Ø 6.0 mm Bolt M6x38 Washer Ø 8.
Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence. When ordering parts, the following information will be required: item description, item model number, item serial number/item lot date code, and the replacement part reference number.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the Klutch product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
