Product Manual

Page 6 of 12
Specific Operation Warnings
⚠WARNING
• Never use a hammer, pipe extension, or cheater bar on the spindle handle of the vise.
Main Parts of Bench Vise
Assembly Instructions
⚠WARNING
• Only hand-tighten swivel base lock-down nuts at the sides of the vise.
• Never use a pipe extension to tighten locks nut handles.
Note: Nuts and bolts for attaching the vise to a table are not provided and should be purchased
separately.
• Vise must be mounted on a solid, level surface capable of supporting the combined weight of
vise, intended work pieces, and applicable forces.
• Use the holes in the base of the vise as a template to mark the bench surface. Verify that the
installation surface does not have hidden utility lines before drilling or driving screws. Drill
holes and attach the vise firmly to the work surface with the use of the proper size bolts, nuts,
locks, and flat washers. Never weld the base of a vise to a metal object.
• Place the handle into the hole of the spindle bar and screw the open end.