Product Manual

Page 5 of 58
Technical Specifications
Property
Specification
Power Supply
230V, 45A, 50/60 Hz, Single Phase
No-Load Voltage
69V DC
Output Range – MIG/FLUX Core
40 to 250A DC
Output Range - STICK
20 to 200A DC
Output Range - TIG
15 to 250A DC
Duty Cycle - MIG
20% @ 250A
Duty Cycle – Stick
20% @ 200A
Duty Cycle – TIG
20% @ 250A
Suggested Wire
Steel, Stainless Steel, Aluminum
Suggested Wire Diameter
.023, .030; .035, .045
Suggested Electrodes
E6013, E7014, E7018, Stainless Steel
Electrode Diameter
1/16 inch to 5/32 inch
Dimensions
26.89 inch x 12.09 inch x 19.84 inch
Weight
72 lbs.
Important Safety Information
⚠WARNING
• Read and understand all instructions. Failure to follow all instructions may result in serious injury or
property damage.
• The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this tool. Always be
aware of the environment and ensure that the tool is used in a safe and responsible manner.
• Do not allow persons to operate or assemble the product until they have read this manual and have
developed a thorough understanding of how it works.
• Do not modify this product in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the product
was designed.
• Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. It will
be a safer experience and do the job better at the capacity for which it was intended. DO NOT use
this equipment for a purpose for which it was not intended.
• Industrial or commercial applications must follow OSHA requirements.