Manualshelf

Product Manual

ManualsBrandsKlutch ManualsMIG + Flux Core WeldersInverter-Powered Multi-Process Welder with LCD, MIG Torch and Lift Start TIG Torch — Inverter, MIG, Flux-Cored, Stick and TIG, 230V, 15–250 Amp Output
31323334353637383940
Page 36 of 58
a. Arc Force setting can be used while welding to help keep the electrode from “sticking”.
It will provide a very short boost of output amperage when the arc is too short. Turn the
MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to the desired Arc Force
Setting.
b. Press the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to confirm your
selection
13. Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to VRD.
14. Push in the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to confirm your selection.
15. Adjusting VRD
a. VRD stands for Voltage Reduction Device. It is used to reduce the OCV or Open Circuit
Voltage that is present at the weld output connections when not welding.
b. VRD is a safety function required in some countries and meant to protect the operator
should the operator accidently come in contact with the weld output connections.
DC TIG WELDING SET-UP
1. Press the ENTER BUTTON.
2. Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB until the LIFT TIG screen is
displayed.
3. Push in the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to confirm your selection.
4. Follow the display set-up: