Manualshelf

Product Manual

ManualsBrandsKlutch ManualsMIG + Flux Core WeldersInverter-Powered Multi-Process Welder with LCD, MIG Torch and Lift Start TIG Torch — Inverter, MIG, Flux-Cored, Stick and TIG, 230V, 15–250 Amp Output
31323334353637383940
Page 35 of 58
a. When the Amperage is highlighted in Orange, you are able to turn the MULTI-
FUNCTION ADJUSTMENT/SELECTION KNOB to increase or decrease amperage.
6. Push in the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to change the orange
background to an orange outline.
7. Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to Hot Start.
8. Push in the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to confirm your selection.
9. Adjusting Hot Start
a. Hot Start setting can be used to help get hard to start electrodes started easier. It will
provide a very short boost of output voltage to help with starting the electrode. Turn the
MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to the desired Hot Start
Setting.
b. Press the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to confirm your
selection
10. Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to Arc Force.
11. Push in the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to confirm your selection.
12. Adjusting Arc Force.