Manualshelf

Product Manual

ManualsBrandsKlutch ManualsMIG + Flux Core WeldersInverter-Powered Multi-Process Welder with LCD, MIG Torch and Lift Start TIG Torch — Inverter, MIG, Flux-Cored, Stick and TIG, 230V, 15–250 Amp Output
31323334353637383940
Page 34 of 58
c. Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to adjust the Post Gas
time.
STICK WELDING SET-UP
1. Press the ENTER BUTTON.
2. Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB until the Stick/MMA screen is
displayed.
3. Push in the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to confirm your selection.
4. Follow the display set-up:
a. Connect the Electrode Holder to the Positive (+) Weld Output Connection.
b. Connect the Ground Cable to the Negative (-) Weld Output Connection.
5. Adjusting Amperage