Product Manual

Page 33 of 58
b. Press the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to select.
c. Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to adjust the Pre-Gas
Time.
d. Press the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to confirm.
14. Run In WFS – Run In WFS allows you to adjust the speed of the wire feeding; after you pull the
trigger and just prior to a weld establishing. Wire that “Runs In” slower will generally provide a
smoother and less “Poppy” arc starting. We recommend using the programmed Run In WFS
setting. However, you do have the option to adjust the Run In WFS.
a. From the screen above, push in the MULTI-FUNCTION ADJUSTMENT/SELECTION
KNOB so the orange highlight turns into an orange outline. Then turn the MULTI-
FUNCTION ADJUSTMENT/SELECTION KNOB clockwise until you see the Run In
WFS in the middle of the screen.
b. Press the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to select.
c. Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to adjust the Run In
WFS time.
d. Press the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to confirm.
15. Post Gas Time – Post Gas Time allows you to adjust the amount of time that gas will flow after
you have released the trigger and the arc has stopped. The purpose of Post Gas is to keep the
weld under shielding gas as the puddle solidifies. It can also be used to prolong the contact tip
and nozzle life by assisting to cool these items after the weld. We recommend using the
programmed Post Gas setting. However, you do have the option to adjust the Post Gas time.
a. From the screen above, push in the MULTI-FUNCTION ADJUSTMENT/SELECTION
KNOB so the orange highlight turns into an orange outline. Then turn the MULTI-
FUNCTION ADJUSTMENT/SELECTION KNOB clockwise until you see the Post Gas
Time in the middle of the screen.
b. Press the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to select.