Manualshelf

Product Manual

ManualsBrandsKlutch ManualsMIG + Flux Core WeldersInverter-Powered Multi-Process Welder with LCD, MIG Torch and Lift Start TIG Torch — Inverter, MIG, Flux-Cored, Stick and TIG, 230V, 15–250 Amp Output
31323334353637383940
Page 31 of 58
5. Choose Wire Size
a. Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to the wire size you
need. Press in the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to make
your selection.
6. Choose the thickness of material
a. Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to change the
thickness of material. Press in the MULTI-FUNCTION ADJUSTMENT/SELECTION
KNOB to make your selection.
7. Your Welder is now ready to weld!
8. Fine Tuning Parameters – The set-up process is designed to get the welder set up into a good
welding condition for the material you are welding. You may choose to adjust the parameters
to meet your individual weld need.
9. Adjusting Wire Speed (Inch/Min) – When the Inches Per Minute is highlighted in Orange, you
can turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to increase or decrease
wire speed.
10. Adjusting Voltage – Adjust voltage by turning the VOLTAGE CONTROL KNOB,
11. Inductance – We recommend using the programmed inductance setting. However, you do have
the option to adjust inductance.