Product Manual
Page 5 of 47
Technical Specifications
Property
Specification
Power Supply
120V, 20A, 50/60 Hz, Single Phase
230V, 36A, 50/60 Hz, Single Phase
No-Load Voltage
66V DC with 120V Input Power
69V DC with 230V Input Power
Output Range - MIG
40 to 90A DC with 120V Input Power
40 to 200A DC with 230V Input Power
Output Range - STICK
10 to 70A DC with 120V Input Power
10 to 180A DC with 230V Input Power
Duty Cycle-MIG
40% @ 90A with 120V Input Power
20% @ 200A with 230V Input Power
Duty Cycle-STICK
40% @ 70A with 120V Input Power
20% @ 170A with 230V Input Power
Suggested Wire
Steel, Stainless Steel, Aluminum
Suggested Wire Diameter
.023, .030; .035
Suggested Electrodes
E6013, E7014, E7018, Stainless Steel
Electrode Diameter
1/16 inch to 5/32 inch
Dimensions
20-3/4” x 9-1/2” x 16-1/4”
Weight
33 lb.
Important Safety Information
⚠WARNING
Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this tool. Always be
aware of the environment and ensure that the tool is used in a safe and responsible manner.
Do not allow persons to operate or assemble the product until they have read this manual and
have developed a thorough understanding of how it works.
Do not modify this product in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the product
was designed.
Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. It will
be a safer experience and do the job better at the capacity for which it was intended. DO NOT use
this equipment for a purpose for which it was not intended.
Industrial or commercial applications must follow OSHA requirements.