Product Manual

Page 27 of 47
item you are welding.
11. Push in the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to confirm your selection.
12. This machine is now set to weld.
13. If you wish to adjust the amperage, turn the WIRE FEED SPEED AND AMPERAGE
CONTROL KNOB.
a. Counter Clockwise to decrease amperage.
b. Clockwise to increase amperage.
Note the Green Range on the Amperage Range. This is the “sweet” spot for that welding
electrode.
i. If you are unable to adjust the amperage to within the green range, you are
most likely operating on 120V power. Connect the welder to 230V power to
complete setup and welding.
14. If you wish to adjust the ARC Force or DIG, it can be adjusted by turning the Voltage Control
Knob. This adjusts the intensity of the arc, how deep it is penetrating. The 0 to 10 adjustment
is only a reference adjustment.
a. Counter-clockwise to decrease Arc Force.
b. Clockwise to increase Arc Force.
15. If you wish to adjust the ARC Force or DIG, it can be adjusted by turning the Voltage Control
Knob. This adjusts the intensity of the arc, how deep it is penetrating. The 0 to 10 adjustment
is only a reference adjustment.
a. Counter-clockwise to decrease Arc Force.
b. Clockwise to increase Arc Force.
DC TIG WELDING SET-UP
1. Press the START BUTTON.
2. Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB until the TIG screen is
displayed.
3. Push in the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to confirm your selection.
4. Follow the display set-up:
a. Connect the TIG torch to the Negative (-) Weld Output Connection.
b. Connect the Ground Cable to the Positive (+) Weld Output Connection.
5. Push in the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB.
6. Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to choose the tungsten size
you are using.
7. Push in the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to confirm your selection.
8. Use the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to select the thickness of the
item you are welding.
9. Push in the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to confirm your selection.
10. This machine is now set to weld.
11. If you wish to adjust the amperage, turn the WIRE FEED SPEED AND AMPERAGE
CONTROL KNOB.
a. Counter Clockwise to decrease amperage.
b. Clockwise to increase amperage.
c. Note the Green Range on the Amperage Range. This is the “sweet” spot for weld you
are making.
i. If you are unable to adjust the amperage to within the green range, you are
most likely operating on 120V power. Connect the welder to 230V power to
complete setup and welding.
MIG OPERATION
1. POWER SWITCH - The power switch supplies electrical current to the welder. Whenever the
power switch is in the ON position, the welding circuit is activated. ALWAYS turn the power
switch to the OFF position and unplug the welder before performing any maintenance.
2. HOLDING THE TORCH - The best way to hold the welding torch is the way it feels most
comfortable to you. While practicing to use your new welder, experiment holding the torch in