Product Manual

ManualsBrandsKlutch ManualsMulti Process WeldersMIG Welder with Multi-Processes, Spool Gun, LCD Display and Dual-Voltage Plug — Inverter, MIG, Flux-Cored, Arc and TIG, 120V/230V, 40 to 200 Amp Output

Page 25 of 47

i. Connect the Pigtail to the Negative (-) Weld Output Connection

ii. Connect the Ground Cable to the Positive (+) Weld Output Connection

4. Push in the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB.

a. Use the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to select your wire

size.

b. Push in the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to confirm your

selection.

c. Use the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to select the

thickness of the item you are welding.

d. Push in the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to confirm your

selection.

5. This machine is now set to weld.

6. If you have a previously set and saved program, you can now load it. Skip this step if you

have not previously set and saved a program.

a. Press the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to access the

“Press For Options” screen.

b. Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB all the way

clockwise to the SAVE icon.

c. Press the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to confirm.

d. Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to select load.

e. Press the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to confirm.

f. Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to select the

program number you wish to load.

g. Press the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to confirm.

h. Review the program parameters. Then turn the MULTI-FUNCTION

ADJUSTMENT/SELECTION KNOB to the “√”.

i. Press the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to confirm.

j. Your previously set and saved program is now loaded.

7. If you wish to adjust the wire speed (amperage), turn the WIRE FEED SPEED AND

AMPERAGE CONTROL KNOB.

a. Counter-clockwise to decrease amperage.

b. Clockwise to increase amperage.

Note the Green Range on the Wire Speed Range. This is the “sweet” spot for that wire

size.

i. If you are unable to adjust the amperage to within the green range, you are

most likely operating on 120V power. Connect the welder to 230V power to

complete setup and welding.

8. If you wish to adjust the voltage, turn the VOLTAGE CONTROL KNOB.

a. Counter-clockwise to decrease voltage.

b. Clockwise to increase voltage.

i. If you are unable to adjust the amperage to within the green range, you are

most likely operating on 120V power. Connect the welder to 230V power to

complete setup and welding.

9. If you wish to adjust inductance, turn the MULTI-FUNCTION ADJUSTMENT/SELECTION

KNOB.

a. Counter-clockwise to decrease inductance

b. Clockwise to increase inductance

10. For Additional Settings That Can Be Made, press the MULTI-FUNCTION

ADJUSTMENT/SELECTION KNOB.

11. Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to confirm desire to Select

an Icon

12. Push In the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to confirm selection.

a. Spool Gun – This feature is only available in the MIG programs for MIG welding

b. Aluminum.

i. Use the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to select the

SPOOL GUN icon.

ii. Push in the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to

confirm your selection.

iii. Choose the “X” to indicate “No” to using a spool gun.