Manualshelf

Product Manual

ManualsBrandsKlutch ManualsMulti Process WeldersMIG Welder with Multi-Processes, Spool Gun, LCD Display and Dual-Voltage Plug — Inverter, MIG, Flux-Cored, Arc and TIG, 120V/230V, 40 to 200 Amp Output
21222324252627282930
Page 24 of 47
GENERAL SYSTEM SET-UP
1. Press the START BUTTON.
2. Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to the SETTING selection.
3. Push in the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB.
4. Language
a. The language function is not active on this unit.
b. Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to ENGLISH.
c. Press the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB.
5. Units
a. Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB until UNITS screen
is displayed.
b. Push in the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB.
c. Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to selected desired
units measurement.
d. Push in the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to confirm your
selection.
6. Brightness
a. Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB until BRIGHTNESS
screen is displayed.
b. Push in the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB.
c. Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to selected desired
screen brightness.
d. Push in the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to confirm your
selection.
7. To read unit specific information
a. Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB until INFORMATION
screen is displayed.
b. Push in the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB.
c. Serial Number is displayed.
d. Push the START BUTTON to exit.
8. To perform a reset back to factory settings
a. Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB until FACTORY
RESET screen is displayed.
b. Push in the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB.
c. Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to confirm desire to
do a factory reset.
d. Push in the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to start factory
reset or press the START BUTTON to exit.
WIRE FEED WELDING SET-UP
1. Press the START BUTTON.
2. Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB until the desired Wire Feed
Welding screen is displayed.
a. MIG Steel C100 - Choose this option if you are using pure CO2.
b. MIG Steel C25 – Choose this option if using C25 gas which generally is a Argon/CO2
Mix in which the CO2 percentage is 25%.
c. MIG Stainless Steel C3 - Choose this option if you are welding stainless steel with a
Trimix Gas (Argon, CO2 and Helium).
d. MIG AlMg with Pure Argon – Choose this option if you are welding an Aluminum
Manganese Alloy Typically 3000, 5000, 6000 series alloy wire.
e. MIG AlSi with Pure Argon – Choose this option if you are welding an Aluminum
Silicon Alloy Typically 4000 series alloy wire.
f. Flux Cored – Choose this option if you are welding a Shelf Shielded Flux Core Wire.
3. Push in the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to confirm your selection.
a. Follow the display set-up.
b. Connect the Pigtail to the Positive (+) Weld Output Connection.
c. Connect the Ground Cable to the Negative (-) Weld Output Connection.
d. For Flux Core Wire, reverse the polarity to: