Product Manual

Page 10 of 47
eyes and skin. Do not look at the welding arc without proper eye protection.
 Always use a helmet that covers your full face from the neck to top of head and to the back of
each ear.
 Use a lens that meets ANSI standards and safety glasses. For welders under 160 amps output,
use a shade 10 lens; for above 160 amps, use a shade 12. Refer to the ANSI standard Z87.1 for
more information.
 Cover all bare skin areas exposed to the arc with protective clothing and shoes. Flame-retardant
cloth or leather shirts, coats, pants, or coveralls are available for protection.
 Use screens or other barriers to protect other people from the arc rays emitted from your welding.
 Warn people in your welding area when you are going to strike an arc so they can protect
themselves.
⚠WARNING
Fire Hazards
Do not weld on containers or pipes that contain or have had flammable, gaseous, or liquid
combustibles in them. Welding creates sparks and heat that can ignite flammable and
explosive materials.
 Do not operate any electric arc welder in areas where flammable or explosive materials are
present.
 Remove all flammable materials within 35 feet of the welding arc.
 Take precautions to ensure that flying sparks do not cause fires or explosions in hidden areas,
cracks, or areas you cannot see.
 Keep a fire extinguisher close in the case of fire.
 Wear garments that are oil-free with no pockets or cuffs that will collect sparks.
 Do not have on your person any items that are combustible, such as lighters or matches.
 Keep work lead connected as close to the weld area as possible to prevent any unknown,
unintended paths of electrical current from causing electrical shock and fire hazards.
 To prevent any unintended arcs, cut the wire back to ¼" stick out after welding.
⚠CAUTION
Hot Materials - Welded materials are hot and can cause severe burns if handled improperly.
 Do not touch welded materials with bare hands.
 Do not touch the torch nozzle after welding until it has had time to cool down.