Product Manual

To prevent serious injury, read and understand
all warning and instructions before use.
SM-47-4072L8 1” Heavy Duty Impatch Wrench
Actual product may be slightly different from the product described herein.
Tool Specification:
Square Drive: 1”
Free Speed : 5,000 RPM
Max. Torque (ft-lbs): 2,500 ft-lbs
Working Torque Range: 400-1,800 ft-lbs
Air Inlet: 1/2” NPT
Hose Size: 1/2” I.D.
Air Pressure: 90 P.S.I.
Average Air Consumption: 10 CFM
Length: 20-3/4”
Weight: 24.3 Lbs
---------------------------------------------------------------------------------
SAFETY RULES
READ, UNDERSTAND AND KEEP THESE INSTRUCTIONS,
WARNING Failure to follow all instructions listed below may result in serious injury.
WORK AREA HAZARD & PERSONAL SAFETY
1. Keep your work area clean and well lit.
2. Do not operate power tools in explosive atmospheres, such as in the presence of
combustible liquid, gases or dust. Power tools create sparks which may ignite the
dust or fumes.
3. Disconnect tool before performing service or when not in use.
4. High sound levels can cause permanent hearing loss. Use hearing protection
during operation.
5. Maintain a balanced body position and secure footing.
6. Slips/Trips/Falls are a major cause of serious injury or death. Be aware of excess
hose left on the working floor.
7. Repetitive work motions, awkward positions and exposure to vibration can be
harmful to hands and arms. If numbness, tingling, pain or whitening of the skin
occurs, stop using the tool and consult a physician.
8. Always wear impact-resistant eye and face protection when operating, repairing or
performing maintenance of the tool or while changing tool accessories.