Product Manual

Page 8 of 31
DRILL PRESS USE AND CARE
 Do not force the tool. Tools do a better and safer job when used in the manner for which they are
designed. Plan your work, and use the correct tool for the job.
 Check for damaged parts before each use. Carefully check that the tool will operate properly and
perform its intended function. Replace damaged or worn parts immediately. Never operate the
tool with a damaged part.
 Do not use a tool with a malfunctioning switch. Any power tool that cannot be controlled with the
power switch is dangerous and must be repaired by an authorized service representative before
using.
 Disconnect the power/air supply from the product and place the switch in the locked or off position
before making any adjustments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.
 Store the tool when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the tool for good working condition prior to storage and before re-use.
 Use only accessories that are recommended by the manufacturer for use with your tool.
Accessories that may be suitable for one tool may create a risk of injury when used with another
tool. Never use an accessory that has a lower operating speed or operating pressure than the tool
itself.
 Keep guards in place and in working order. Never operate the product without the guards in
place.
 Do not leave the tool running unattended.