Product Manual

Page 7 of 31
ELECTRICAL SAFETY
 Grounded tools must be plugged into an outlet properly installed and grounded in accordance
with all codes and ordinances. Never remove the grounding prong or modify the plug in any way.
Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether
the outlet is properly grounded. If the tools should electrically malfunction or break down,
grounding provides a low resistance path to carry electricity away from the user.
 Double insulated tools are equipped with a polarized plug (one blade is wider than the other). This
plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change
the plug in any way. Double insulation eliminates the need for the three wire grounded power cord
and grounded power supply system.
 Do not allow the product to come into contact with an electrical source. The tool is not insulated
and contact will cause electrical shock.
 Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators.
There is an increased risk of electric shock if your body is grounded.
 Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the
risk of electric shock.
 Do not abuse the power cord. Never use the power cord to carry the tools or pull the plug from an
outlet. Keep the power cord away from heat, oil, sharp edges, or moving parts. Replace damaged
power cords immediately. Damaged power cords increase the risk of electric shock.
 When operating a power tool outside, use an outdoor extension cords marked “W-A” or “W”.
These extension cords are rated for outdoor use, and reduce the risk of electric shock.