Product Manual

Page 21 of 31
Maintenance
 TO AVOID INJURY from accidental starting, always turn the power switch OFF and unplug the
drill press before installing or removing any accessory or attachment or making any adjustment.
 MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest performance.
Follow instructions for lubricating and changing accessories.
Maintain your tool. It is recommended that the general condition of any tool be examined before it is
used. Keep your tool in good repair by adopting a program of conscientious repair and maintenance in
accordance with the recommended procedures found in this manual. Keep all cutting tools sharp and
clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier
to control. Keep handles dry, clean, and free from oil and grease.
Daily Maintenance
Before each use:
Check and adjust the tightness of the belt.
Ensure the protective guard is assembled well.
Check that the power cord is undamaged.
Run the machine
After each use:
Disconnect the power cord.
Clear the scrap iron.
Clean the surface.
Add anti-rust oil onto the metal surface of workbench, baseboard, column and main spindle quill.
Periodic Maintenance
After 100 hours:
Check the tightness of the spindle reset spring.
Lubricate the lifting gear rack of workbench with lubricating grease.
Check that all clamp handles are in good condition.
After 6 months:
Check and ensure the bearing is in good condition.
Check whether the precision of the drilling machine meets the needs of the work.
Check that all electrical parts are in good condition.