Product Manual

Page 10 of 31
 BEFORE STARTING the operation, jog the motor switch to make sure the drill bit does not
wobble or vibrate.
 LET THE SPINDLE REACH FULL SPEED before starting to drill. If your drill press makes an
unfamiliar noise or if it vibrates excessively, stop immediately, turn the drill press OFF and unplug.
Do not restart the unit until the problem is corrected.
 DO NOT perform layout assembly or set up work on the table while the drill press is in operation.
 USE THE RECOMMENDED SPEED for any drill press accessory and for different workpiece
material.
 WHEN DRILLING large diameter holes, clamp the workpiece firmly to the table. Otherwise, the bit
may grab and spin the workpiece at high speeds. DO NOT USE fly cutters or multiple-part hold
cutters, as they can come apart or become unbalanced in use.
 MAKE SURE the spindle has come to a complete stop before touching the workpiece.
 To avoid electrical hazards, fire hazards, or damage to the tool, use proper circuit protection. Use
a separate electrical circuit for your machine. To avoid shock or fire, if power cord is worn or cut,
or damaged in any way, have it replaced immediately.