Product Manual

Page 4 of 25
Intended Use
The Klutch drill press includes variable speeds for drilling holes on cast iron, steel, aluminum, etc. The
machine has been designed for indoor use and must be used only in dry conditions.
Technical Specifications
Property
Specification
Voltage / Frequency:
120V / 60Hz
Motor Power
3/4 HP
Chuck
5/8"
Spindle Travel
3-1/8"
Spindle Taper
MT2
Speed Change
Variable-speed
Speed
480-3600 r/min
Dist. Spindle to Column
5-13/16"
Table Size
7-7/8" x 7-7/8"
Base Size
14-3/16" x 8-11/16"
Column
2-1/4"
Total Height
35-7/16"
NOISE
The noise characteristics, according to EN ISO 3744, are emission values and do not also present
safe working values. Although there is a correlation between emission and nuisance levels, the
relationship is not dependable as an indicator as to whether additional safety measures are necessary
or not. Factors specific to the workplace can influence the nuisance level, such as the length of the
activity, the characteristics of the work room, other sources of noise, etc., for instance the number of
machines and other nearby activities. Dependable work place values can also vary from country to
country. This information should, nonetheless, allow a better estimation of possible dangers and risks.
Noise power level
Sound pressure level at the workplace
No-load
LWA = 74 dB(A)
LpA = 65 dB(A)
Active work
LWA = 75 dB(A)
LpA = 68 dB(A)
The factor of measurement uncertainty is 3 dB.