Product Manual

Page 14 of 25
4. Install the table bracket handle and lock handle.
a. Attach the bracket handle (19) with the provided set screw. (Fig.4)
b. Install the table lock handle (20) to secure the table bracket. (Fig.5)
5. Attach the head assembly
Carefully put the head assembly over column and slide it onto column into position. Align
head frame with table and base.
Fix set screws in right side of head to lock head into position then tighten with Allen wrench.
(Fig.6)
5. Attach the arbor and chuck
1. Install chuck to the arbor tightly. (Fig.7)
2. Open chuck jaws completely by turning attached chuck key counter-clockwise to the end. Put a
piece of scrap wood on the table to protect chuck nose.