Product Manual

Page 6 of 11
Specific Operation Warnings
⚠WARNING
• Never use a hammer, pipe extension, or cheater bar on the spindle handle of a vise.
Main Parts of Bench Vise
Assembly Instructions
⚠WARNING
• Only hand-tighten the swivel base lock-down nuts at the sides of the vise.
• Never use a pipe extension to tighten the lock nut handles.
Note: Nuts and bolts for attaching the vise to a table are not provided and should be purchased
separately.
1. The vise must be mounted on a solid, level surface capable of supporting the combined
weight of the vise, intended work pieces, and applicable forces.
2. Use the holes in the base of the vise as a template to mark the bench surface. Verify that the
installation surface has no hidden utility lines before drilling or driving screws. Drill holes and
attach the vise firmly to the work surface with the use of the proper size bolts, nuts, lock, and
flat washers. Never weld the base of the vise to any metal object.
3. Place the handle into the hole of the spindle bar and screw it in.